Two-row potato planter for mini tractor KSN-90 (3T)

12,400 ₴
Seeders and seedlings
Yesterday 12:32
Україна
Дніпро Get directions →
вул. Тітова, 26
4 views
Published 12 hours ago by AGROZIP
12,400 ₴
вул. Тітова, 26, Дніпро, Україна
Get directions →
4 item views

Two-row potato planter for mini tractor KSN-90 (3T) fully performs all stages of planting the vegetable mechanically, with precisely set parameters, on two rows simultaneously. Calibrated tubers are used for planting and are loaded into two square hoppers with a volume of 45 l each - this allows planting a fairly large area in a short time, achieving a maximum productivity of 0.2 ha/hour. The equipment is attached to mini-tractors with power from 12 horsepower using a three-point hitch system reinforced with steel angles.
The two working sections with which the two-row potato planter KSN-90 (3T) is equipped are secured to a profiled frame with movable bolted connections with pressure plates. The free type of fastenings allows adjustment of the row spacing within 55–75 cm by moving the blocks along the frame. The planting mechanisms located inside the two hoppers are driven by chain drives from the wheels-ground-engaging lugs. A block of interchangeable sprockets on the drive is used to adjust the planting pitch – the required pitch (20, 25, 20 cm) is set by moving the drive chain to the sprocket with the necessary diameter and number of teeth.
Planting depth is adjusted by repositioning the working height of the coulter-like shares from 5 to 15 cm. During planting, the two-row potato planter for mini tractor KSN-90 (3T) captures tubers loaded into the hoppers with the scoops of the chain conveyor, drops them down the guide shaft to the base of the coulters and places them in the cut furrows. The disc hillers located at the rear cover the root crop with soil from both sides while simultaneously forming a high, even earth ridge.
Advantages of the two-row potato planter for mini tractor KSN-90 (3T):

Equipped with two working units.
Operates from chain drives of the wheels-ground-engaging lugs.
Has adjustable row spacing.
Adjustable planting pitch and planting depth.

Aggregating vehicle: mini tractor
Required power of aggregating vehicle, hp: from 12
Weight, kg: 74
Tuber planting depth, mm: from 50 to 150
Number of rows planted simultaneously, pcs: 2
Maximum hopper capacity, l: 2 x 45
Type of coulter: double-disc
Row spacing, cm: 55 - 70

Read more

Published on 2026/10/11

Description

Two-row potato planter for mini tractor KSN-90 (3T) fully performs all stages of planting the vegetable mechanically, with precisely set parameters, on two rows simultaneously. Calibrated tubers are used for planting and are loaded into two square hoppers with a volume of 45 l each - this allows planting a fairly large area in a short time, achieving a maximum productivity of 0.2 ha/hour. The equipment is attached to mini-tractors with power from 12 horsepower using a three-point hitch system reinforced with steel angles.
The two working sections with which the two-row potato planter KSN-90 (3T) is equipped are secured to a profiled frame with movable bolted connections with pressure plates. The free type of fastenings allows adjustment of the row spacing within 55–75 cm by moving the blocks along the frame. The planting mechanisms located inside the two hoppers are driven by chain drives from the wheels-ground-engaging lugs. A block of interchangeable sprockets on the drive is used to adjust the planting pitch – the required pitch (20, 25, 20 cm) is set by moving the drive chain to the sprocket with the necessary diameter and number of teeth.
Planting depth is adjusted by repositioning the working height of the coulter-like shares from 5 to 15 cm. During planting, the two-row potato planter for mini tractor KSN-90 (3T) captures tubers loaded into the hoppers with the scoops of the chain conveyor, drops them down the guide shaft to the base of the coulters and places them in the cut furrows. The disc hillers located at the rear cover the root crop with soil from both sides while simultaneously forming a high, even earth ridge.
Advantages of the two-row potato planter for mini tractor KSN-90 (3T):

Equipped with two working units.
Operates from chain drives of the wheels-ground-engaging lugs.
Has adjustable row spacing.
Adjustable planting pitch and planting depth.

Aggregating vehicle: mini tractor
Required power of aggregating vehicle, hp: from 12
Weight, kg: 74
Tuber planting depth, mm: from 50 to 150
Number of rows planted simultaneously, pcs: 2
Maximum hopper capacity, l: 2 x 45
Type of coulter: double-disc
Row spacing, cm: 55 - 70

    Attributes
Related listings in your area
How far is it? Show listings in my area
Show only listings that are km distanced Show listings

Contact the seller

User is offline
  • 438 active listings
  • Company
  • Registered for Yesterday
  • Дніпро, Дніпропетровська область, Україна
Recently viewed
AGROZIP AGROZIP Yesterday 12:28
Polish hydraulic fertilizer spreader Jar-Met 1000
53,000 ₴
Polish hydraulic fertilizer spreader Jar-Met 1000
Дніпро, Україна
Polish two-disc hydraulic fertilizer spreader Jar-Met 1000 is mounted on tractors with power from 60 horsepower using a three-point hitch. The unit is driven by the PTO; the recommended vehicle speed for better performance is 4-13 km/h. The sturdy metal frame has high resistance to mechanical loads; the 1000-liter hopper capacity is sufficient for efficient ...
Yesterday Fertilizer scattering equipment вул. Тітова, 26
53,000 ₴
Call